How to clean an air duct in Dallas – Easy and reliable

Share This Post

If you’re in Dallas and need to clean an air duct, here is a guide to making cleaning easier. 

Not only will you get the basics right, but you’ll also get the problems and solutions associated with cleaning an air duct without the help of a professional.


House air duct cleaning

House air duct cleaning time

Baking soda is the most common compound used when cleaning an air duct. However, this compound is a mild abrasive, so it’s important to wear gloves. 

You can use steel wool pads or a nylon brush, but you should avoid using a wire brush as they can damage your ventilation system. 

When using baking soda, mix it with water and vinegar in a 50/50 ratio before applying it to the air duct.

Run your vacuum cleaner through the area once you have applied the mixture to the air duct. Then, to ensure that you’re getting rid of all the debris, turn on your machine and let it do its job for at least 10 minutes to ensure that you don’t miss anything.

When you are done with vacuuming, pour distilled white vinegar into the water reservoir of your machine and run that for 3-5 minutes just like you did with baking soda, and then turn off your machine. 

This will help clear out any extra buildup left behind from cleaning the first time around.


Reliable air duct cleaning

This is the first thing you should do when cleaning an air duct. This will help prevent any damage to your system and ensure that the filter is getting a proper amount of air.

Wet vacuums can be used for this. The best type would have a light to see where the debris is, and there will be no dirt left behind. 

You don’t want to vacuum the whole place again later because it isn’t doing any good.

If you need to clean out the inside of your ducts, you want to use a blower. There are two types: one with a long tube and one with a small vacuum nozzle. You might need both depending on how much buildup is in your system.

Now that you have cleaned out your air ducts, it’s time to eliminate any leftover dust and dirt with dryer sheets or paper towels. This will ensure that there isn’t anything left over after your cleaning process has been completed.

What to take into the field if you want to clean by yourself

You’ll need a vacuum cleaner (a small one with a brush attachment is best), gloves, masks, and your trusty duct-cleaning scraper.

You’ll also need some paper towels to clean up the mess you’ll be making in your home.

The most important item you’ll need is your attention to detail. Many people who try to do this on their own often make mistakes that can cause more damage than cleaning would have caused in the first place.

Tips for making the process easier

To make the process easier, you’ll need a few supplies. To get started, you’ll want to gather these items:

-duct brush





-duct tape.

You’ll also want to take some time to prepare your workspace. You will want a clean area to lay out the supplies and put them on your apron. 

In addition, you must work in a well-ventilated area so that you are not breathing in any harmful fumes. So grab some fans or open windows and start cleaning.

Contact us today to schedule a free consultation for air duct cleaning and dryer vent cleaning services in Dallas & Frisco!

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

HVAC System Cleaning Contractor

How to Choose an HVAC System Cleaning Contractor: The Criteria You Need to Know If you’re looking for an HVAC system cleaning contractor, it’s important